Legacy Firmware - Crestron Home
This Crestron Home driver will effortlessly connect a Colorbeam GATEway to a Crestron Home system.
Once the driver has been loaded and configured with the Colorbeam GATEway's IP address, it will quickly grab all available keypads and loads as named within the GATEway's programming interface.
Loads (Legacy Only): While this isn't a "native" light within the system, it's as close as we can possibly get. All available loads will be available to add to the room desired within Crestron Home. Each load within a room will be aggregated into a single "loads" tile. Currently, all load intensities display on the main page. On the main tile, there is a button labeled "Adjust Scene" which allows a user to adjust the parameters of each fixture within that area should there be fixtures that are more channels than a single intensity-only type of fixture. RGB/RGBW/Variable White will each have a fader pertaining to the appropriate options. Controls are exposed as programmable events so a programmer can add them as a Quick Action trigger, sequence trigger, or keypad trigger. Sequences can create intensity and color scenes quickly and add them as a quick action button in the room.
Keypads (Legacy Only): Keypads will be available with all available buttons within the ranges supported and exposed by the device's API. Controls are exposed as programmable events so a programmer can add them as a Quick Action trigger, sequence trigger, or keypad trigger.
For more information, please refer to the help file found here.
For more information, please see the help file available on drivers.crestron.io for the latest information.